hikey Opcode
Causes the associated region to play when a constraint on MIDI note is respected. Used in conjunction with lokey, it makes the region play when the incoming note is equal to or higher than lokey and equal to or lower than hikey.
Opcode Prototype
hikey=[upper limit]
Parameter
The mandatory [upper limit] parameter defines the range's upper limit. This parameter only accepts valid MIDI note numbers (from 0 to 127) or names (from C-1 to G9):
| Note Numbers | Note Names | Octave |
|---|---|---|
| 0 to 11 | C-1 to B-1 | -1 |
| 12 to 23 | C0 to B0 | 0 |
| 24 to 35 | C1 to B1 | 1 |
| 36 to 47 | C2 to B2 | 2 |
| 48 to 59 | C3 to B3 | 3 |
| 60 to 71 | C4 to B4 | 4 |
| 72 to 83 | C5 to B5 | 5 |
| 84 to 95 | C6 to B6 | 6 |
| 96 to 107 | C7 to B7 | 7 |
| 108 to 119 | C8 to B8 | 8 |
| 120 to 127 | C9 to G9 | 9 |
Allowed Sections
May be used in sections <global> and <region>.
Examples
Defines one region for each of three octaves.
<region>
sample=mysamples/octave01.wav
lokey=24
hikey=35
<region>
sample=mysamples/octave02.wav
lokey=C2
hikey=B2
<region>
sample=mysamples/octave03.wav
lokey=48
hikey=59
Availability
Since LinuxSampler 2.0.0
Conforms to SFZ v1 Standard.